[lwlan-user] prism2_cs: Initialization failed with Adtec Adlink 345CF

[David Aldred]

(Sorry if this duplicates - soemthign went awry with my list subscription).

I'm trying to use an AdTec Adlink 345CF Wireless Card with a PCMCIA adapter in 
a small laptop running Ultima Linux (Slackware 10.2 based, kernel 2.4.32).  
The Adlink card is shown in the database as supported.

When I insert the PCMCIA adapter with the CF card in place, the following 
appears in dmesg:

prism2cs_init: prism2_cs.o: 0.2.1-pre25 Loaded
prism2cs_init: dev_info is: prism2_cs
prism2_cs: GetNextTuple: No more items
prism2sta_config: NextTuple failure? It's probably a Vcc mismatch.
prism2sta_event: prism2_cs: Initialization failed!
prism2_cs.o: 0.2.1-pre25 Unloaded
p80211.o: 0.2.1-pre25 Unloaded

Following this, there is (unsurprisingly!) no wireless interface listed in 
iwconfig.

I don't know if it helps, but the same CF card works happily in a Sharp Zaurus 
- linux-based PDA.  uname -a on the Zaurus indicates kernel 2.4.18, and added 
to dmesg on insertion of the card is:

init_module: prism2_cs.o: 0.1.12-shp Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 35, io 0xc5670000-0xc567003f
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver 
services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
sa1100_pcmcia_suspend(0)


Any suggestions / help gratefully received!

-- 
David Aldred

-- 
David Aldred