[lwlan-user] linux-wlan does not work with 2.6.13.2

[John H.]

hmm, it seems /sys/bus/pcmcia/devices
is empty:( am i still supposed to use pcmcia_core, etc?

On 9/27/05, John H. <mistamaila at gmail.com> wrote:
>
> I noticed I now have a dev12986 device under ifconfig, with a hwaddress
> different than what is on my pcmcia linksys card. what could i be doing
> wrong? Everything worked fine prior
>
> I noticed upgrading, as required, to 3.2 module-init-tools, my resolution
> on display is screwy now, which is bad. pccardctl ident says
> Socket 0:
> no product info available
>
> despite yenta socket being loaded, and lights on card are on.
>
>
> any advice appreciated.
> On 9/27/05, John H. <mistamaila at gmail.com> wrote:
> >
> > i did everything on that page, installing pcmciautils, but the same
> > thing is happening. am i supposed to install linux-wlan in some special way
> > after that? i notice pcmciautils installs in /usr/local
> >
> > so
> > did i need to tell linux-wlan to use /usr/local/etc/pcmcia instead of
> > /etc/pcmcia?
> >
> > i didn't deal with the resource database, as it said it was better to
> > try to do without. however, from my other config.opts from pcmcia, this
> > is what i have
> >
> > include memory 0x80000000-0x80000fff, memory 0xffeff000-0xffefffff,
> > memory 0x000d7000-0x000d7fff
> > include port 0xff40-0xff7f
> >
> > # First built-in serial port
> > exclude irq 1
> > exclude irq 2
> > exclude irq 3
> > exclude irq 4
> > exclude irq 6
> > exclude irq 8
> > exclude irq 9
> > exclude irq 10
> > exclude irq 11
> > exclude irq 12
> > exclude irq 13
> > exclude irq 14
> > exclude irq 15
> > exclude irq 4
> > # Second built-in serial port
> > exclude irq 3
> >
> > On 9/26/05, John H. <mistamaila at gmail.com > wrote:
> > >
> > > do i not need pcmcia-cs anymore then?
> > >
> > > On 9/26/05, solomon at linux-wlan.com < solomon at linux-wlan.com> wrote:
> > > >
> > > > On Mon, Sep 26, 2005 at 10:14:37AM -0500, John H. wrote:
> > > > > ok, i was using 2.6.12.1 <http://2.6.12.1> < http://2.6.12.1>, and
> > > > linux-wlan was working fine
> > > > > for my pcmcia prism2_cs linksys wmp11.
> > > >
> > > > 2.6.13+ switched to a new backend for handling PCMCIA.
> > > > linux-wlan-ng works with it. Full details here:
> > > >
> > > > http://kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
> > > >
> > > > - Solomon
> > > > --
> > > > Solomon Peachy solomon at linux-wlan.com
> > > > AbsoluteValue Systems http://www.linux-wlan.com
> > > > 721-D North Drive +1 (321) 259-0737 (office)
> > > > Melbourne, FL 32934 +1 (321) 259-0286 (fax)
> > > >
> > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.linux-wlan.com/pipermail/linux-wlan-user/attachments/20050927/8f9342e9/attachment.html