[lwlan-user] prism2dl: what HFA384x_PDA_BASE use? How to solve "failed to find PDR for plugrec"?

[Iñigo Lopez Barranco]

Thanks for the tip.
I've downloaded and compiled hostap_cs and prism2_srec, changing the appropiate lines in the header file, but when I try to download the hex file for 1.4.9 firmware to flash, i get:

Ioctl: Connection timed out
Missing wlan component info
Could not read wlan RIDs

Did something similar happened to you?. It's quite strange I can't upgrade firmaware with any tool (windows or linux based), but I don't have any more cards to check if this one is useless.
Thanks in advance.


-----Mensaje original-----
De: Joerg Albert [mailto:joerg.albert@gmx.de] 
Enviado el: domingo, 06 de julio de 2003 3:07
Para: linux-wlan-user@lists.linux-wlan.com
Asunto: Re: [lwlan-user] prism2dl: what HFA384x_PDA_BASE use? How to solve "failed to find PDR for plugrec"?


Hi,

I can't answer your original questions but I've just successfully upgraded
my USR2410 from 0.8.3 to 1.4.9 using the host_ap's prism2_srec utility
(as recommended in
http://www.red-bean.com/~proski/prism2dl/readme.prism2dl) and this hex
file http://hostap.epitest.fi/hostap/2002-08/1540.html.

If you'll try this, don't forget to uncomment
#define PRISM2_DOWNLOAD_SUPPORT
#define PRISM2_NON_VOLATILE_DOWNLOAD
in driver/modules/hostap_config.h

/Jörg
-- 
Joerg Albert
joerg.albert@gmx.de


_______________________________________________
Linux-wlan-user mailing list
Linux-wlan-user@lists.linux-wlan.com
http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user