[lwlan-user] [non-subscriber] Corega USB WLAN stick

[Dale Weber]

	Hi,

	I just installed the wlan drives in RedHat 9, and the prisim2_pci module 
works perfectly with my LinkSys Wireless PCI card.  However, I can't get my 
USB Wireless unit to work at all.  The prisim2_usb module gets loaded just 
fine via /etc/modules.conf (aliased to wlan1), but I can't get any response 
to or from the wlan1 interface.  My PCI card is wlan0 and I wanted to have 
the USB unit be wlan1 (for testing at present), but I can't even get it 
configured.

	I get 'device doesn't exist' type messages for the USB adapter.  I've 
checked, double checked, and even triple checked my wlan configuration, and 
everything looks good.

	Yes, I have "wlan0 wlan1" set and have both enabled properly in wlan.conf.

	Any ideas what I could be missing?  I have the drivers built into a custom 
2.4.21 kernel.  As mentioned, the PCI adapter works great as wlan0, but I 
can't get the USB adapter configured as wlan1.  This is all just for testing.

	My goal is to turn this Linux box into a wireless access point.  I have 
regualar 10/100 baseT NIC in the box also, connected to my wired cable/dsl 
router.

	Thanks in advance!

	WW
-- 
The Dynaplex Network - http://www.thedynaplex.net
We support Open Source 100%!