[lwlan-user] Compaq WL200 PCI startup problem

[Aaron Drew]

The WL200 is a PCMCIA card on a hard-wired Cirrus Logic PCMCIA bridge.
The standard i82365 driver works with it. Try upgrading firmware to at
least 0.8.0 (see the support area at Compaq.com) or 0.8.3 (using a
Samsung or SMC firmware upgrade program).

- Aaron

> -----Original Message-----
> From: linux-wlan-user-admin@lists.linux-wlan.com
[mailto:linux-wlan-user-
> admin@lists.linux-wlan.com] On Behalf Of John O'Hara
> Sent: Monday, 18 March 2002 4:57 AM
> To: linux-wlan-user@lists.linux-wlan.com
> Subject: Re: [lwlan-user] Compaq WL200 PCI startup problem
> 
> If the card is truly PCI and not PCMCIA, you shouldn't need to worry
about
> the PCMCIA drivers...just follow instructions for a PCI based card and
> compile the source for PCI, not PCMCIA.  Hope this is a start
> ----- Original Message -----
> From: "John Bovey" <jdb@ukc.ac.uk>
> To: <linux-wlan-user@lists.linux-wlan.com>
> Sent: Sunday, March 17, 2002 7:13 AM
> Subject: [lwlan-user] Compaq WL200 PCI startup problem
> 
> 
> >
> > Hello,
> >
> > I am trying to install a WL200 PCI Wlan card on a desktop PC, but
when
> > I attempt to start pcmcia the machine freezes completely and has to
> > be rebooted. Can anybody sugest where I should start looking?
Software
> > versions are:
> >
> > System: Debian testing
> > Kernel: 2.4.18
> > pcmcia-cs: 3.1.31
> > linux-wlan-ng: 0.1.13
> >
> > John Bovey
> >
> > _______________________________________________
> > Linux-wlan-user mailing list
> > Linux-wlan-user@lists.linux-wlan.com
> > http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user
> 
> 
> 
> _______________________________________________
> Linux-wlan-user mailing list
> Linux-wlan-user@lists.linux-wlan.com
> http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user